原理:
将育苗盘悬挂在能转动的育苗床支架上,利用电力带动育苗床支架转动,使各苗盘不断交换位置,使盘中的作物得到的阳光和水分均匀一致。
特点:
1、利用微电脑自动控制苗盘,定时交换苗盘位置,不需专人长期现场操作。
2、苗盘分上、中、下三层,是实现棚内立体栽培的理想设施。
3、提高了温室大棚的利用率,其有效利用率比常规温室提高了1.5倍左右。
规格:
苗盘最低离地高度300—500㎜,苗盘架620×650㎜,自动交换位置间隔时间10分钟—60分钟,由用户自定。
结构特点:
全钢架结构,由扣件和标件组合成形。
Principle:
Plate can be hung in the nursery seedling bed rotating bracket, using the power driven rotating nursery bed bracket, so that a continuous exchange of the seedling tray, and make the disk of the sun and water plants to be uniform.
Features:
1, the use of microcomputer automatic control seedling tray, regular exchange of seedling tray location, do not need someone long-term field operations.
2, Miao set points, the middle and lower three floors, three-dimensional culture is to achieve the ideal shed facilities.
3, increasing the utilization of greenhouses, its effective utilization rate than conventional greenhouse increased 1.5 times.
Specifications:
300-500 mm Minimum Ground Clearance seedling tray, seedling tray holder 620 × 650 mm, automatic exchange of position intervals for 10 minutes -60 minutes, set by the user.
Structural features:
All steel frame structures, fasteners and standard parts by the combination of forming.
联系人:王总
联系电话:13330846355
座机:028-27091783
400电话:4001850560
邮箱:626377431@qq.com
地址:四川省简阳市东溪镇奎星路36号